Ford TPMS Relearn Procedure (without Tool)

• Drive the vehicle above 20 mph for at least two minutes.
• Park and turn the ignition off.
• Turn the ignition on.
• Turn the hazard flashers on then off 3 times, ending with them off.
  • Note: this must be completed within 10 seconds.
  • The horn will beep once and the TPMS warning light will start blinking.
• Deflate the front-left tire until the horn beeps.
• Deflate the front-right tire until the horn beeps.
• Deflate the rear-right tire until the horn beeps.
• Deflate the rear-left tire until the horn beeps.
• Once the last sensor has been registered, the warning light will stop blinking. Vehicles equipped with an EVIC will show a message indicating that the relearn was successful.
• Turn the ignition off.
  • If the horn beeps twice, the relearn procedure was unsuccessful.